Description
Starrett Ejector Spring K8-1
Starrett Ejector Spring K8-1 Features:
A simple, but highly effective method of ejecting the core from a hole saw after completion of the cut.
Where it is necessary to assemble the two parts of the core ejector, twist the spring on to the ejector plate until it locks in place.
- Twist the spring on the assembled core ejector over the pilot drill until the pilot drill is protruding from the plate.
- Drill the hole. Please note that using the core ejector will reduce the cutting depth of the saw.
Recommended Maximum Material Thickness:
Hole Saw Product Code FCH, DCH, CT: 7mm.
Hole Saw Product Code D and MPH: 5mm.
Be Aware. In some cases it is possible that the core may be ejected from the saw at high speed.
Please always use safety goggles and glasses and take extra care if drilling vertically.
