Extra long Plastic stand off / spacers with inserts (35 mm to 150 mm) Specialist for multiple uses

£2.63£3.50

Extra long Plastic stand off / spacers for multiple uses

• Provides stable support for waste pipework clips or other fitments that require spacing/standing off

• One tool installation – Cross head screwdriver

• Central through hole to insert normal size screws

SKU: N/A Category:

Description

Extra long Plastic stand off / spacers for multiple uses 20 & 25 mm diameter

Increasing the height of plastic spacers for various installation work would require ridiculously long and expensive screws .  I can now offer a long spacer 20 mm diameter with a through hole to accommodate and push through  normal sized screws. Provides support for waste pipework clips. etc…

The spacer is internally tapped M12 to provide clearance.  Once installed a threaded reducer is then screwed in providing a thread more appropriate for securing tasks i.e. M5, M6 or M8.(Truss head screws for M8 are not supplied, not available)

• One size screw only required, avoids extra long screws which are expensive and difficult to gauge the length.

• One tool installation – Cross head screwdriver

• Central through hole to insert normal size supplied screws

• Reducer M12 to M6 to facilitate Truss head Machine Screws.

• Presently In White, Black,(Acetal)  Dark Grey (PVC) & Red (Polyester)

• Diameter presently 20 & 25 mm will provide more options if demand increases.

• Three options of internal reducer thread  M5, M6  or M8.

Please be aware:  these are custom made to order and are non returnable, please ensure they are the correct Colour,  Height, Diameter and insert size for your requirements.

Contents: one spacer, Stainless screw, Wall Plug,   reducer M12 to M5, M6 and  Truss head screw. Truss head screws for M8 are not available

How to install

  1. Drill and Insert wall plug as appropriate.
  2. Insert the screw through the support spacer and secure to the wall, ceiling, joist etc
  3. Insert and screw in the M12 to M5, M6  or M8. reducer using a supplied machine screw
  4.  Remove the screw leaving the reducer in place,  the bracket etc.. can now be attached using appropriate machine screws
  5. If the spacer requires removal,  use the cross head screwdriver to remove first the the reducer, which will need pushing in to engage.

 

Additional information

Weight .1 kg
Dimensions 10 × 5 × 5 cm
Colour

White, Black, Dark Grey, Red

Height of Spacer

35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75 mm, 80 mm, 85 mm, 90 mm, 95 mm, 100 mm, 105 mm, 110 mm, 115 mm, 120 mm, 130 mm, 140 mm, 150 mm

Insert Thread size

M5, M6, M8

Diameter of Spacer

20 mm, 25 mm

You may also like…